Web Toolbar by Wibiya
Share on Facebook
Share on Twitter
Share via e-mail
©2011, 2017, International Sew-Right
Phone 1-905-374-3600
“Protecting you where you need it most“ ™

Advantages:


* Wire mesh core  

* Resilient under pressure, springs back upon load release

* Silicone rubber coating  

* Low coefficient of friction

* Excellent chemical resistance

* Graphite coating  

* More abrasion resistant than natural white.

* Graphite coating is permanent at high temperatures

   i.e. length, materials, etc.

  





SILICA

Continuous Temp 1,800°F (982°C) Melt Temp 3,000°F (1,649°C)

WIRE-INSERTED CERAMIC

Continuous Temp 1,800°F (982°C) Melt Temp 2,300°F (1,260°C)

3M NEXTEL 312

Continuous Temp 2,012°F (1,100°C) Melt Temp 3,272°F (1,800°C)

VERMICULITE FIBERGLASS

Continuous Temp 1,000°F (538°C) Short Exposure Temp 1,400°F (760°C)

FIBERGLASS

Service 1,000°F (538°C) Maximum 1,200°F (649°C)

CERAMIC

Continuous Temp 1,800°F (982°C) Melt Temp 2,300°F (1,260°C)


Applications:


* Boiler Doors, Dust Collectors, Pollution Control Equip

* Brick Manufacturing (Kiln car to Kiln car seal)

* Industrial Ovens, Industrial Furnaces


Tadpoles

Temp

Jacketing /Tail

Core

2,000°F

(1,093°C)

Silica

Wire-Inserted Ceramic

3M Nextel 312 Silica

Silica
Ceramic
Inconel Wire Mesh

1,500°F

(816°C)

Vermiculite Fiberglass

S2 Fiberglass

3M Hitex IF37

Stainless Steel Wire
Ceramic

1,000°F

(538°C)

Coated Fiberglass

Fiberglass

Wire-Inserted Fiberglass

Fiberglass

600°F

(316°C)

Teflon Coated Fiberglass

Fiberglass

500°F

(260°C)

Silicone Coated Fiberglass

Aluminized Fiberglass

Fiberglass
Silicone Sponge or Tubing